United Arab Emirates country code, +971 explained.
The country code for United Arab Emirates is +971. To call United Arab Emirates from the US, dial 011 971, then the 2-digit area code and the local number. From India, Pakistan or the UK, dial 00 971. On any mobile you can dial +971. Below: the full dialing format, step-by-step guide, carriers, rates, and VoIP rules for United Arab Emirates.
United Arab Emirates
Abu Dhabi · Middle East
· COUNTRY INFO · VERIFIED
ISO Alpha-2
AE
Capital
Abu Dhabi
Region
Middle East
Timezone
UTC+4
· DIALING GUIDE · VERIFIED
FULL DIAL FORMAT
011 · +971 · XX · XXXXXXX
How United Arab Emirates numbers break down
A complete number to United Arab Emirates follows this pattern. Twiching adds the exit and country codes automatically when you dial from the app.
EXIT CODE
Dial from the US/Canada to leave the country.
COUNTRY CODE
Routes the call directly into United Arab Emirates.
AREA / MOBILE
Regional or mobile prefix — drop the leading 0.
LOCAL NUMBER
The subscriber's local number.
COMPLETE NUMBER FORMAT
011 · +971 · XX · XXXXXXX
United Arab Emirates on the map
Abu Dhabi · Middle East
ROUTE
Tier-1 Direct
CLI
Verified
ROUTING
Real-time
How to call United Arab Emirates from other countries
Dial your country's exit code, then the code below, then the local number. From any mobile phone you can skip the exit code and dial +971 instead, from anywhere in the world.
From United States
011 971
then the local number
From Canada
011 971
then the local number
From India
00 971
then the local number
From Pakistan
00 971
then the local number
From Nigeria
009 971
then the local number
From United Kingdom
00 971
then the local number
From Kenya
000 971
then the local number
From Saudi Arabia
00 971
then the local number
From Bangladesh
00 971
then the local number
From Egypt
00 971
then the local number
From Germany
00 971
then the local number
From Ghana
00 971
then the local number
Exit codes shown are the standard international call prefixes for each country.
Virtual numbers & SIP trunking for United Arab Emirates
Businesses entering United Arab Emirates often start with a local +971 virtual number. You set it up in the dashboard. It rings through to any device. It shows local caller ID from the first call.
Local +971 caller ID
Calls display a recognisable United Arab Emirates number instead of an unfamiliar international one.
SIP trunking
Route your existing PBX or softphone through Twiching's Tier-1 trunk — no hardware swap.
Minutes to provision
Numbers activate in the dashboard the same day, with no on-the-ground carrier contract.
+971
United Arab Emirates · ready to provision today
What makes Twiching's United Arab Emirates routes different
Every call into United Arab Emirates uses the same Tier-1 backbone Twiching runs across all 191 countries. There is no separate infrastructure and no lower reliability tier for smaller markets.
United Arab Emirates
+971
191
Countries in directory
UNITED ARAB EMIRATES INCLUDED
99.99%
Uptime SLA
ENTERPRISE PLAN
Direct
Carrier interconnects
TIER-1 ROUTES
Real-time
Quality-based routing
24/7 NOC
How United Arab Emirates phone numbers are structured
Numbering Format
COUNTRY
+971
AREA
XX
LOCAL
XXXXXXX
United Arab Emirates has an open numbering plan under country code +971. Numbers have a 2-digit prefix and a 7-digit subscriber number. That is 9 digits in total. Locally, numbers usually start with "0". Drop it when you call United Arab Emirates from outside the country.
Carriers & language
Mobile coverage in United Arab Emirates comes from 2 major networks: Etisalat (e&), Du. Internet penetration is 99%. VoIP is restricted, and TRA licenses only approved operators. Language (Arabic, English) and currency (AED) both matter for IVR, SMS and support scheduling.
Middle East context
Several Middle Eastern regulators license VoIP to specific operators. Licensed, compliant termination is essential for reliable delivery into the region.
Skipping the exit code
United Arab Emirates calls from the US need 011 first, then +971 — the exit code isn't optional.
Keeping the national trunk "0"
United Arab Emirates numbers often show a domestic leading 0 — drop it once you've dialed the +971 country code from outside the country.
Ignoring the time difference
United Arab Emirates runs on UTC+4. Check local hours before dialing so calls don't land outside business time.
Using non-compliant routes
Because TRA tightly regulates VoIP in United Arab Emirates, only licensed routes deliver reliably; grey routes risk being blocked outright.
Compliance, carriers & rates for United Arab Emirates
Restricted — TRA licensed only
Regulated by TRA
TRA licenses VoIP in United Arab Emirates. Routing through an unlicensed provider risks dropped calls. Twiching's routes into United Arab Emirates stay on the compliant side of that line.
- TRA licensed VoIP only
- Consumer VoIP restricted
- Business VoIP permitted
Direct Tier-1 interconnect with Etisalat (e&) — no wholesale transit in between.
US → United Arab Emirates
$0.025/min
United Arab Emirates → US
$0.025/min
Starting rates, quoted per minute in USD
How businesses use a United Arab Emirates number
Answer-rate advantage
Cold outbound calls into United Arab Emirates convert better from a +971 number people recognise. This is especially true on first contact.
Direct routing, not transit
United Arab Emirates traffic uses Twiching's direct link with Etisalat (e&). It skips lower-tier wholesale transit, which can hurt call quality.
Follow-the-sun coverage
Staff United Arab Emirates hours (UTC+4) with routing that sends each call to the right team at the right local time.
One platform, United Arab Emirates included
United Arab Emirates is set up like every other Twiching market. A new country in the directory needs no separate onboarding.
FAQ
Calling United Arab Emirates — frequently asked questions
The country code for United Arab Emirates is +971. To call from the United States, dial 011, then 971, then the local number. Twiching adds the 011 and +971 for you when you dial from the app. You only enter the local number.
Dial 011 (the US exit code), then 971 (the United Arab Emirates country code). Then dial the area or mobile prefix and the subscriber number. Drop any leading trunk 0. That digit is only used for calls made inside United Arab Emirates.
Dial your country's exit code, then 971, then the local number. For example: 011 971 from the US, Canada; 00 971 from India, Pakistan, the UK, Saudi Arabia, Bangladesh, Egypt, Germany, Ghana; 009 971 from Nigeria; 000 971 from Kenya. On a mobile phone you can dial +971 from anywhere.
TRA is the regulator for United Arab Emirates. Twiching routes calls under its rules, using compliant, licensed termination. It avoids unlicensed grey routes, which can be blocked or degraded.
Etisalat (e&) is among the largest networks in United Arab Emirates. Twiching connects directly with it for Tier-1 delivery. Direct links like this keep call quality and answer rates steady. Lower-tier transit does not.
Yes. United Arab Emirates numbers are often written with a domestic leading "0". Drop it when you dial in from abroad. Keeping the 0 on an international call is a common reason calls to United Arab Emirates fail.
Full country code directory
Calling elsewhere in Middle East? Every country below has the same dial-code breakdown, carrier list, and VoIP regulation summary as United Arab Emirates. All 190 other countries are listed below, Middle East first.
Get started
Get a United Arab Emirates number.
See what a real phone stack does.
Phone numbers, voice, SMS and AI on one account. Direct Tier-1 routing into United Arab Emirates from day one.
Compliance with applicable regulations required.