Iran country code, +98 explained.
The country code for Iran is +98. To call Iran from the US, dial 011 98, then the 3-digit area code and the local number. From India, Pakistan or the UK, dial 00 98. On any mobile you can dial +98. Below: the full dialing format, step-by-step guide, carriers, rates, and VoIP rules for Iran.
Iran
Tehran · Middle East
· COUNTRY INFO · VERIFIED
ISO Alpha-2
IR
Capital
Tehran
Region
Middle East
Timezone
Asia/Tehran
· DIALING GUIDE · VERIFIED
FULL DIAL FORMAT
011 · +98 · XXX · XXXXXXXX
How Iran numbers break down
A complete number to Iran follows this pattern. Twiching adds the exit and country codes automatically when you dial from the app.
EXIT CODE
Dial from the US/Canada to leave the country.
COUNTRY CODE
Routes the call directly into Iran.
AREA / MOBILE
Regional or mobile prefix — drop the leading 0.
LOCAL NUMBER
The subscriber's local number.
COMPLETE NUMBER FORMAT
011 · +98 · XXX · XXXXXXXX
Iran on the map
Tehran · Middle East
ROUTE
Tier-1 Direct
CLI
Verified
ROUTING
Real-time
How to call Iran from other countries
Dial your country's exit code, then the code below, then the local number. From any mobile phone you can skip the exit code and dial +98 instead, from anywhere in the world.
From United States
011 98
then the local number
From Canada
011 98
then the local number
From India
00 98
then the local number
From Pakistan
00 98
then the local number
From Nigeria
009 98
then the local number
From United Kingdom
00 98
then the local number
From Kenya
000 98
then the local number
From Saudi Arabia
00 98
then the local number
From Bangladesh
00 98
then the local number
From Egypt
00 98
then the local number
From Germany
00 98
then the local number
From Ghana
00 98
then the local number
Exit codes shown are the standard international call prefixes for each country.
Iran virtual phone numbers, built for business
A Iran virtual number from Twiching plugs into SIP trunking. Your existing phone system can dial out with local +98 presence. You don't need new hardware or a new carrier.
Local +98 caller ID
Calls display a recognisable Iran number instead of an unfamiliar international one.
SIP trunking
Route your existing PBX or softphone through Twiching's Tier-1 trunk — no hardware swap.
Minutes to provision
Numbers activate in the dashboard the same day, with no on-the-ground carrier contract.
+98
Iran · ready to provision today
Tier-1 delivery into Iran, end to end
Direct interconnects with Hamrah-e-Avval (MCI) and the wider Iran network mean calls skip lower-tier wholesale transit. This holds for every call, not just high-volume routes.
Iran
+98
191
Countries in directory
IRAN INCLUDED
99.99%
Uptime SLA
ENTERPRISE PLAN
Direct
Carrier interconnects
TIER-1 ROUTES
Real-time
Quality-based routing
24/7 NOC
How Iran phone numbers are structured
Numbering Format
COUNTRY
+98
AREA
XXX
LOCAL
XXXXXXXX
Iran numbers sit under country code +98 in an open plan. Each one has a 3-digit area or mobile prefix and an 8-digit subscriber line. That is 11 digits in all. A domestic "0" usually comes before the prefix. Drop it when you dial Iran from abroad.
Carriers & language
3 major networks cover Iran: Hamrah-e-Avval (MCI), Irancell (MTN Irancell), Rightel. Internet penetration is 78%. VoIP is restricted, and Ministry of Information and Communications Technology (ICT), Iran licenses only approved operators. Persian is the main language and IRR is the currency. Use both when you write IVR scripts, SMS content and support hours.
Middle East context
Several Middle Eastern regulators license VoIP to specific operators. Licensed, compliant termination is essential for reliable delivery into the region.
Skipping the exit code
From the US you must dial 011 before the +98 country code to reach Iran.
Keeping the national trunk "0"
That leading 0 on an Iran number is for domestic calls only; leave it out when dialing in after +98.
Ignoring the time difference
Before dialing Iran, check the local clock — it runs on Asia/Tehran, and off-hours calls tend to go unanswered.
Using non-compliant routes
VoIP into Iran is restricted by Ministry of Information and Communications Technology (ICT), Iran; grey routes are blocked or dropped, so licensed termination is required for reliable delivery.
Compliance, carriers & rates for Iran
Restricted — Ministry of ICT licensed only
Regulated by Ministry of Information and Communications Technology (ICT), Iran
Ministry of Information and Communications Technology (ICT), Iran limits VoIP termination in Iran to licensed operators. Unlicensed grey routes are often blocked or degraded. Twiching terminates only on compliant, licensed paths.
- VoIP is heavily restricted; unlicensed VoIP services are blocked by the government.
- Only state-approved operators licensed by the Ministry of ICT may offer VoIP services.
- International sanctions and domestic censorship laws significantly limit VoIP access.
Direct Tier-1 interconnect with Hamrah-e-Avval (MCI) — no wholesale transit in between.
US → Iran
$0.09/min
Iran → US
$0.09/min
Starting rates, quoted per minute in USD
How businesses use an Iran number
Tehran-recognisable numbers
Callers in Tehran and across Iran see a familiar +98 prefix. They are less likely to ignore it.
Middle East outbound & support
Run sales and support lines into Iran over Tier-1 routes. These connect with networks like Hamrah-e-Avval (MCI).
Time-zone-aware routing
Calls into Iran go to the team on shift for Asia/Tehran. They don't ring a desk where everyone has gone home.
No local carrier contract needed
Entering Iran over SIP trunking skips the local carrier contract. The number is set up and billed like every other Twiching market.
FAQ
Calling Iran — frequently asked questions
The country code for Iran is +98. To call from the United States, dial 011, then 98, then the local number. Twiching adds the 011 and +98 for you when you dial from the app. You only enter the local number.
Dial 011 (the US exit code), then 98 (the Iran country code). Then dial the area or mobile prefix and the subscriber number. Drop any leading trunk 0. That digit is only used for calls made inside Iran.
Dial your country's exit code, then 98, then the local number. For example: 011 98 from the US, Canada; 00 98 from India, Pakistan, the UK, Saudi Arabia, Bangladesh, Egypt, Germany, Ghana; 009 98 from Nigeria; 000 98 from Kenya. On a mobile phone you can dial +98 from anywhere.
Yes, where locally supported. One Twiching Iran number can handle both voice calls and SMS. You don't need to set up and manage two numbers for one customer-facing line.
Iran runs on Asia/Tehran. Knowing this helps you schedule calls and support hours. Your calls then land in the local business day, not in the middle of the night.
Yes. Iran numbers are often written with a domestic leading "0". Drop it when you dial in from abroad. Keeping the 0 on an international call is a common reason calls to Iran fail.
Full country code directory
Iran is one of several Middle East markets Twiching covers — browse the rest of the directory below to compare dial codes, VoIP rules, and rates across the region. All 190 other countries are listed below, Middle East first.
Get started
Get an Iran number.
See what a real phone stack does.
Phone numbers, voice, SMS and AI on one account. Direct Tier-1 routing into Iran from day one.
Compliance with applicable regulations required.