Czech Republic country code, +420 explained.
The country code for Czech Republic is +420. To call Czech Republic from the US, dial 011 420, then the 2-digit area code and the local number. From India, Pakistan or the UK, dial 00 420. On any mobile you can dial +420. Below: the full dialing format, step-by-step guide, carriers, rates, and VoIP rules for Czech Republic.
Czech Republic
Prague · Europe
· COUNTRY INFO · VERIFIED
ISO Alpha-2
CZ
Capital
Prague
Region
Europe
Timezone
UTC+1
· DIALING GUIDE · VERIFIED
FULL DIAL FORMAT
011 · +420 · XX · XXXXXXXX
How Czech Republic numbers break down
A complete number to Czech Republic follows this pattern. Twiching adds the exit and country codes automatically when you dial from the app.
EXIT CODE
Dial from the US/Canada to leave the country.
COUNTRY CODE
Routes the call directly into Czech Republic.
AREA / MOBILE
Regional or mobile prefix — drop the leading 0.
LOCAL NUMBER
The subscriber's local number.
COMPLETE NUMBER FORMAT
011 · +420 · XX · XXXXXXXX
Czech Republic on the map
Prague · Europe
ROUTE
Tier-1 Direct
CLI
Verified
ROUTING
Real-time
How to call Czech Republic from other countries
Dial your country's exit code, then the code below, then the local number. From any mobile phone you can skip the exit code and dial +420 instead, from anywhere in the world.
From United States
011 420
then the local number
From Canada
011 420
then the local number
From India
00 420
then the local number
From Pakistan
00 420
then the local number
From Nigeria
009 420
then the local number
From United Kingdom
00 420
then the local number
From Kenya
000 420
then the local number
From Saudi Arabia
00 420
then the local number
From Bangladesh
00 420
then the local number
From Egypt
00 420
then the local number
From Germany
00 420
then the local number
From Ghana
00 420
then the local number
Exit codes shown are the standard international call prefixes for each country.
Czech Republic virtual phone numbers, built for business
You don't need to lease a physical line in Czech Republic. A Twiching SIP trunk sends your existing PBX or softphone traffic through a local +420 number. Call quality stays the same, with no on-the-ground infrastructure.
Local +420 caller ID
Calls display a recognisable Czech Republic number instead of an unfamiliar international one.
SIP trunking
Route your existing PBX or softphone through Twiching's Tier-1 trunk — no hardware swap.
Minutes to provision
Numbers activate in the dashboard the same day, with no on-the-ground carrier contract.
+420
Czech Republic · ready to provision today
Tier-1 delivery into Czech Republic, end to end
Direct interconnects with O2 Czech Republic and the wider Czech Republic network mean calls skip lower-tier wholesale transit. This holds for every call, not just high-volume routes.
Czech Republic
+420
191
Countries in directory
CZECH REPUBLIC INCLUDED
99.99%
Uptime SLA
ENTERPRISE PLAN
Direct
Carrier interconnects
TIER-1 ROUTES
Real-time
Quality-based routing
24/7 NOC
How Czech Republic phone numbers are structured
Numbering Format
COUNTRY
+420
AREA
XX
LOCAL
XXXXXXXX
Czech Republic uses an open numbering plan under country code +420. After the country code comes a 2-digit area or mobile prefix. Then comes an 8-digit subscriber number. Together that is a 10-digit national number. Domestic numbers often start with a trunk "0". Leave it out when you call Czech Republic from abroad.
Carriers & language
Czech Republic has 88% internet penetration. It has 3 major mobile networks: O2 Czech Republic, T-Mobile Czech Republic, Vodafone Czech Republic. VoIP is permitted and regulated by CTU (Czech Telecommunication Office). The local currency is CZK. The main language is Czech. Both shape IVR prompts, SMS content and business hours.
Europe context
Most European numbering plans follow ITU-T E.164. They use a national trunk prefix that is dropped for international dialing. Cross-border VoIP is widely supported across the region.
Skipping the exit code
From the US you must dial 011 before the +420 country code to reach Czech Republic.
Keeping the national trunk "0"
That leading 0 on a Czech Republic number is for domestic calls only; leave it out when dialing in after +420.
Ignoring the time difference
Before dialing Czech Republic, check the local clock — it runs on UTC+1, and off-hours calls tend to go unanswered.
Compliance, carriers & rates for Czech Republic
Permitted — CTU regulated
Regulated by CTU (Czech Telecommunication Office)
Czech Republic's regulatory stance under CTU (Czech Telecommunication Office) is open toward VoIP. A business can start calling and texting into the country without a separate compliance process.
- VoIP providers must notify CTU and comply with the Electronic Communications Act No. 127/2005.
- Lawful interception obligations apply to all VoIP operators per Czech security legislation.
- Number portability is fully mandated for geographic and non-geographic VoIP numbers.
Direct Tier-1 interconnect with O2 Czech Republic — no wholesale transit in between.
US → Czech Republic
$0.009/min
Czech Republic → US
$0.007/min
Starting rates, quoted per minute in USD
How businesses use a Czech Republic number
Prague-recognisable numbers
Callers in Prague and across Czech Republic see a familiar +420 prefix. They are less likely to ignore it.
Sales & support in one line
One Czech Republic number can handle inbound support and outbound sales. Both calls use Tier-1 routes into O2 Czech Republic and the wider network.
Time-zone-aware routing
Calls into Czech Republic go to the team on shift for UTC+1. They don't ring a desk where everyone has gone home.
SIP trunking for market entry
Set up a Czech Republic presence on SIP trunking before you commit to local infrastructure. The same number scales from a pilot to full local hiring.
FAQ
Calling Czech Republic — frequently asked questions
The country code for Czech Republic is +420. To call from the United States, dial 011, then 420, then the local number. Twiching adds the 011 and +420 for you when you dial from the app. You only enter the local number.
Dial 011 (the US exit code), then 420 (the Czech Republic country code). Then dial the area or mobile prefix and the subscriber number. Drop any leading trunk 0. That digit is only used for calls made inside Czech Republic.
Dial your country's exit code, then 420, then the local number. For example: 011 420 from the US, Canada; 00 420 from India, Pakistan, the UK, Saudi Arabia, Bangladesh, Egypt, Germany, Ghana; 009 420 from Nigeria; 000 420 from Kenya. On a mobile phone you can dial +420 from anywhere.
Where locally supported, yes. Twiching's Czech Republic numbers can send and receive SMS as well as voice calls. One number can then cover both two-way conversations and outbound alerts.
Czech Republic has 88% internet penetration. This is a useful sign of how well VoIP and SMS channels will perform there. Higher penetration usually means steadier call quality and better app-based message delivery.
3 major networks serve Czech Republic: O2 Czech Republic, T-Mobile Czech Republic, Vodafone Czech Republic. Twiching connects directly with these carriers over Tier-1 routes. It does not rely on third-party transit.
Full country code directory
Europe is fully covered in Twiching's 191-country directory. Jump to any of the markets below for the same level of detail shown on this Czech Republic page. All 190 other countries are listed below, Europe first.
Get started
Get a Czech Republic number.
See what a real phone stack does.
Phone numbers, voice, SMS and AI on one account. Direct Tier-1 routing into Czech Republic from day one.
Compliance with applicable regulations required.